Discover Scale Model Railroading at
STRUCTURE BUILDING - The Foamcore/Veneer method
An OnLine Clinic presented by HORAILROAD.COM
Only simple tools are needed to work with black foam core.
  • Metal straight edge
  • Sharp hobby knife 
  • Hot glue gun

This is all you need but a cutting pad is recommended to extend the life of the blade.  It also saves the surface you're working on from scratches, and cuts.

Caution: A Hot Glue Gun can burn you.  
Adult supervision is required!

cl2_018_tools_foamcore.jpg (47435 bytes)

Caution: Hobby Blades are very sharp and can cause cuts. Adult supervision is required!

   

The OnLine Clinic copyright 2001 by Ken Spranza and horailroad.com